© 2023 Beeswift Limited

Fire Retardant Boilersuits

• 220 gram 99% Cotton, 1% Anti-static fibre
• Flame retardant/Anti static treated fabric
• FR retro-reflective tape. (Nordic Design)
• Concealed zip front to neck
• Two breast pockets, brass zip closure
• Two hip pockets, vertical access
• One rear hip patch pocket with flap
• One plain patch hip pocket
• Rule pocket
• Half elasticated waist
• Plain cuffs and ankles

• ISO 11611: 2007 Class 1 A1 - Protective clothing for use in welding
• EN ISO 11612: 2008 A1, B1, C1 - Protection against heat and flame
• EN 1149-5: 2008 (EN 1149-3: 2004) - Anti Static - Material performance and design requirements

• Does NOT conform to EN ISO 20471

• 220 gram 99% Cotton, 1% Anti-static fibre
• Flame retardant/Anti static treated fabric
• FR retro-reflective tape. (Nordic Design)
• Concealed zip front to neck
• Two breast pockets, brass zip closure
• Two hip pockets, vertical access
• One rear hip patch pocket with flap
• One plain patch hip pocket
• Rule pocket
• Half elasticated waist
• Plain cuffs and ankles

• ISO 11611: 2007 Class 1 A1 - Protective clothing for use in welding
• EN ISO 11612: 2008 A1, B1, C1 - Protection against heat and flame
• EN 1149-5: 2008 (EN 1149-3: 2004) - Anti Static - Material performance and design requirements

• Does NOT conform to EN ISO 20471

• Multi purpose 'utilties' boilersuit
• Fire Retardant
• Anti Static
• 320gsm Hi Vis flame retardant treated fabric with anti static grid
• 80% Cotton 19% Polyester 1% anti static
• 2 Vertical side access hip pockets
• High visibility
• 1 left breast pocket with sewn down flap
• Concealed stud fly front to neck
• Plain back
• Internal knee pouch pockets
• Elastic to waist
• Plain cuffs and ankles
• Retro-reflective tape
• FR/AS embroidery to left sleeve

EN ISO 11612: 2008 Class A1. B1. C1. - Protection against heat and flame
EN1149-5: 2008 - Anti Static - Material performance and design requirements
EN ISO 20471: 2013 Class 3. - Test requirements for high visibility

• 300 gram 100% cotton drill fabric with flame retardant treatment
• Concealed stud front to neck
• One left breast pocket with flap
• Two front hip pockets
• Plain back and hips
• Embroidered 'FR' logo to upper left sleeve

ISO 11611:2007 Class 1 A1 - Protective clothing for use in welding
ISO 11612:2008 A1, B1, C1 - Protection against heat and flame

1 garment per polybag.
10 garments per carton.

• 300 gram 100% cotton drill fabric with flame retardant treatment
• FR reflective tape. (Nordic Pattern)
• Concealed stud front to neck
• One left breast pocket with flap
• Two front hip pockets
• Knee pad pockets
• Plain back and hips

ISO11611: 2007 Class 1 A1 - Protective clothing for use in welding
ISO11612: 2008 A1, B1, C1 - Protection against heat and flame

• Does NOT conform to EN ISO 20471

• 300 gram 100% cotton drill fabric with flame retardant treatment
• FR reflective tape. (Nordic Pattern)
• Concealed stud front to neck
• One left breast pocket with flap
• Two front hip pockets
• Knee pad pockets
• Plain back and hips

ISO11611: 2007 Class 1 A1 - Protective clothing for use in welding
ISO11612: 2008 A1, B1, C1 - Protection against heat and flame

• Does NOT conform to EN ISO 20471

• 300 gram 100% cotton drill fabric with flame retardant treatment
• FR reflective tape. (Nordic Pattern)
• Concealed stud front to neck
• One left breast pocket with flap
• Two front hip pockets
• Knee pad pockets
• Plain back and hips

EN ISO 11611: 2007 Class 1 A1 - Protective clothing for use in welding
EN ISO 11612: 2008 A1, B1, C1 - Protection against heat and flame

• Does NOT conform to EN ISO 20471

• 300 gram 100% cotton drill fabric with flame retardant treatment
• FR reflective tape. (Nordic Pattern)
• Concealed stud front to neck
• One left breast pocket with flap
• Two front hip pockets
• Knee pad pockets
• Plain back and hips

ISO11611: 2007 Class 1 A1 - Protective clothing for use in welding
ISO11612: 2008 A1, B1, C1 - Protection against heat and flame

• Does NOT conform to EN ISO 20471

• 300 gram 100% cotton drill fabric with flame retardant treatment.
• Concealed stud front to neck.
• One left breast pocket with flap.
• Two front hip pockets.
• Plain back and hips.
• Embroidered 'FR' logo to upper left sleeve

EN ISO 11611:2007 Class 1 A1 - Protective clothing for use in welding
EN ISO 11612:2008 A1, B1, C1 - Protection against heat and flame

1 garment per polybag.
10 garments per carton.

• 300 gram 100% cotton drill fabric with flame retardant treatment
• Concealed stud front to neck
• One left breast pocket with flap
• Two front hip pockets
• Plain back and hips
• Embroidered 'FR' logo to upper left sleeve

ISO 11611:2007 Class 1 A1 - Protective clothing for use in welding
ISO 11612:2008 A1, B1, C1 - Protection against heat and flame

1 garment per polybag
10 garments per carton

• 300 gram 100% cotton drill fabric with flame retardant treatment
• Concealed stud front to neck
• One left breast pocket with flap
• Two front hip pockets
• Plain back and hips
• Embroidered 'FR' logo to upper left sleeve

EN ISO 11611:2007 Class 1 A1 - Protective clothing for use in welding
EN ISO 11612:2008 A1, B1, C1 - Protection against heat and flame

1 garment per polybag
10 garments per carton

• Concealed zip closure with press studs fastening
• 2 chest pockets complete with flap and press stud closure
• Gas detection loops for positioning of antennas, cables and detector
• Elastic waist
• 2 Side pockets with press stud closure
• Back pocket complete with flap and press stud closure
• Backpleat for free movement
• Thigh pocket with flap and press stud closure
• Ruler pocket
• Adjustable cuffs and leg opening with press stud closure
• Main seams triple stitched
• Reflective striping
• 80% Cotton, 19% Polyester, 1% Antistatic fibre,260 gsm Twill
• Conforms to the following standards:
• EN ISO 13688:2013 Protective clothing general requirements
• EN ISO 11612:2010 (A1 B1 C1 F1) Protection against heat and flame
• EN ISO 11611:2008 Class 1 Protective clothing for use in welding
• EN 13034:2005+A1:2009 Chemical protective clothing (type 6)
• EN 1149-5:2008 Anti Static material performance and design requirements
• EN 61482-1-2:2008 (Class 1=4kA)- Box arc testing

• Concealed zip closure with press studs fastening
• 2 chest pockets complete with flap and press stud closure
• Gas detection loops for positioning of antennas, cables and detector
• Elastic waist
• 2 Side pockets with press stud closure
• Back pocket complete with flap and press stud closure
• Backpleat for free movement
• Thigh pocket with flap and press stud closure
• Ruler pocket
• Adjustable cuffs and leg opening with press stud closure
• Main seams triple stitched
• Reflective striping
• 80% Cotton, 19% Polyester, 1% Antistatic fibre,260 gsm Twill
• Conforms to the following standards:
• EN ISO 13688:2013 Protective clothing general requirements
• EN ISO 11612:2010 (A1 B1 C1 F1) Protection against heat and flame
• EN ISO 11611:2008 Class 1 Protective clothing for use in welding
• EN 13034:2005+A1:2009 Chemical protective clothing (type 6)
• EN 1149-5:2008 Anti Static material performance and design requirements
• EN 61482-1-2:2008 (Class 1=4kA)- Box arc testing

  • 13 Products